Itech Ultra Cast Resin 500 ML

NOTE: The setting of exposure time

1.The exposure time should be adjusted according to printer light energy, layer thickness and model structure.

   If the layer height less than 50um, we suggest the exposure time of each layer will be deducted about 2s.

2.Bottom layer count: base thickness / each layer thickness +1

   e.g. base thickness 0.4mm, each layer thickness 50um, then the layer count = 0.4/0.05+1= 9 layers.

3.When printing with ordinary FEP/NFEP film, the recommended lifting distance as below:

    Less than 7” screen size, lifting distance: 6mm；

     7-10”screen size, lifting distance: 8-10mm;

     10.1”screen size, lifting distance: 11mm；

     13.3”screen size, lifting distance: 14mm;

     15”screen size, lifting distance: 15mm.

      When printing with fast printing film, lifting distance can be decrease 30-50%.

      e.g. lifting speed was 80 (mm/min) at regular film, you can adjust to 40-60(mm/min) while using ACF film.

4.Recommended exposure time:

Notice: White and yellow of the printed model do not effect the casting results. Uneven color may show if you print thick models.